Strut Channel Roll Forming Machine 4 In 1 For USA
Strut Channel is a standard cold roll formed steel used in electrical industry or constructions for structural support. Which is usually formed from metal coil strips, roll formed into an open channel section with lips to provide additional stiffness. The basis strut channel sizes are: 41*41. 21*21, and also some customized shapes.
The strut Channel roll forming machine is a powerful and versatile piece of equipment capable of meeting the production needs of strut channels in solar photovoltaic mounting systems. It boasts features like high precision, long service life, ease of operation, and provides various optional features and customization options.
Profile Drawing
Sample Show
Work Flow
Strut Channel Roll Forming Machine 4 In 1 For USA
Equipment Advantages
1.The Production Line Uses High-Speed Punching Machine And Skd11 Material Mold,So As To Ensure That 12 Meters Of Board Can Be Punched In One Minute.
2.The Production Line Can Produce Four Different Height Profiles,So As To Achieve Multi-Specification Production And Less Floor Space.
3.In Order To Reduce The Deformation Of The Incision,The Post-Cutting Device Of This Equipment Adopts The Method Of Shearing From Bottom To Top.
Material of Strut Channel Roll Forming Machine 4 In 1 For USA(Luxury Type)
1.Material Thickness: 2.0-2.5mm
2.Applicable material:GI/GL/PosMAC
3.Material Yield Strength :235-390Mpa
4.Feeding width:About 98-179mm
Introduction to machine decomposition
1.5T-600 Hydraulic Uncoiler
Hydraulic control of the inner holes of the steel roll contraction and stopping
MAX. Feeding width: 600 mm
Inner diameter of the coil: 508 ± 30mm, outer diameter: 1500mm
Maximum capacity: 5 tons, motor: 3KW, frequency conversion speed adjustment
Oil pump motor: 3KW
Increase automatic feeding power and automatic shutdown device
Liquid pressure arm device
2.Leveling Device
Upper three, down four, and seven rollers leveling device.
With the feeding guide rail, the main framework is welded with H450 steel.
The axis is made of 45#steel, which is hot and hot, and hard chrome.
Diameter = φ90 mm, precision processing.
Electric power: 3 kW.
3.Servo Feeding Device
4.63T Yangli Cylinder Punching Machine
The 63-ton high-speed punch is equipped with a set of punching models before roll forming.
The punch has safety covers on all sides and doors on one side.
Controlled by the PLC system.
The feeding motor is more accurate by the servo motor, the servo motor power is 3KW.
5.Punching Mould
6.Hydraulic Pre Cutting Device
7.Roll Forming Mill
With the feeding guide rail, the main framework is welded with H400 steel.
Side wall thickness: Q235 T18mm;
Tie rod: ф22 galvanized
The rolling wheels use bearing steel GCR15 (= EN31 steel) precision processing, the surface is hard chrome, 0.04mm thick, and the surface mirror treatment (longer service life, stronger rust);
The shaft is made of 45# steel, quenched and tempered heat treated, hard chrome plated.
Diameter = 80 mm, precision processing.
Gear and chain movement about 22 steps to form.
Main motor (Poli Lai brand) = 15kW, frequency speed adjustment.
8.Cooling system
9.Hydraulic Post Cutting Device
Post to cut, stop to cut, two -piece cutting design without feeding
Hydraulic motor: 5.5kW
Cutting tool material: CR12Mov (= SKD11, has at least one million cutting life), heat treatment to HRC58-62 degrees
The cutting power is provided by the host's independent hydraulic station
10.Hydraulic Station
11.PLC Control System
Automatic control quantity and cutting length
Enter production data (production batch, number of production pieces, production length, etc.) on the touch screen,
Automatically complete production.
Combine: PLC, inverter, touch screen, encoder, etc.
12.Exit Rack
No motivation, two units, rolling wheels on it, easy to move
Product Tags:
|
|
Strut Channel Roll Forming Machine 4 In 1 For USA Images
|
